Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware

Why Architectural Drafting Is Common in Architectural Design

For architectural design projects, while there is the emphasis on using 3D models and architectural BIM modeling, the time-tested practice of using architectural drafting and 2D technical drawings is still commonplace in the AEC industry. Architectural drafting has evolved from the drawing board to computer-aided design and drafting (CAD) software programs. Drafting practices help to provide architectural construction drawings that include the technical details of architectural, structural and electrical elements required for the construction of a building. To understand the stage at which architectural drafting takes place, the workflow of a building design lifecycle must be considered.

The basic workflow of an architectural design project starts with the architect creating a conceptual plan which is usually modelled into architectural 3D models and rendered as photorealistic images for marketing and presentation to clients and customers.

Once the conceptual design is approved by the client, the design is then progressed into more detail and shared with other parties such as structural and MEP engineers. The way in which the design is progressed for the ‘design development’ phase by an architect lends itself to two options, either to develop a 3D model with more detail and then create subsequent sheets and details using a 3D tool such as Revit or AutoCAD, or as is still commonplace, to develop the concept design in 2D using more traditional methods. From the conceptual plans provided by architects and engineers, a drafter can convert these designs using CAD software programs to create technical drawings.

Architectural drafting is the process of creating technical drawings which include the floor plan, sections, elevations, detailed drawings and other documents in a construction drawing set (CD Set), which are typically required for the construction of a building.

The difference between Architectural Drafting and Modelling

Architectural drafting refers to creating 2D technical drawings and architectural construction drawings which are mainly used by contractors and consultants on site. Architectural 3D modelling refers to creating 3D models and renders of photorealistic images which are mainly used to present the architectural design for marketing purposes and then progressed from there to create the 2D technical drawings, in effect feeling like an extra stage (the 3D modelling element). The main software used for drafting, to create 2D technical drawings is AutoCAD while modellers use Revit and ArchiCAD to create 3D models and rendered images. Architectural draftsmen need to have basic 2D and 3D software knowledge such as AutoCAD and knowledge of technical codes and drafting guidelines specified by organisations such as American National Standards Institute (ANSI), American Society of Mechanical Engineers (ASME), American Design Drafting Association (ADDA), Public Works Government Services Canada (PWGSC), National Institute of Building Sciences (NIBS), BSI British Standards Institute and Standards Australia Code AS1100. Architectural modellers need to have a deeper understanding of architectural, building and construction concepts and experience with 3D software programs such as Revit and ArchiCAD.

Why Architectural Drafting is still Common in Architectural Design Practices

Architectural 3D models are preferred by architects and designers because they provide a 3D perspective of the conceptual plan of the building; it makes management of project data easier and allows for design changes on the go. However, construction companies that require technical specifications of the architectural project prefer 2D technical drawings and architectural construction drawings because they provide accurate details required for construction, most of the resources involved in construction understand 2D drawings, there are no issues with compatibility of software as compared to when using 3D models and it is a suitable solution to meet the budgetary requirements of a construction project. Some of the reasons why architectural drafting is preferable by several construction companies include:

• Suitable as per construction requirements – In some building projects, 2D technical drawings or architectural CAD drawings are sufficient to complete construction, where additional information that 3D models provide is not required. A construction drawing set (CD set) includes all the floor plans, elevations, sections and detailed drawings required for construction. Technical codes, symbols and other additional information such as the type of material are provided in technical drawings. Therefore, construction companies find 2D technical drawings sufficient to successfully complete construction.

• Availability of technical resources – Not all companies have technical resources to deliver 3D models. While drafting teams are qualified to work on AutoCAD to deliver 2D technical drawings, they may not be qualified to work on Revit to deliver 3D models. In the construction industry, the availability of drafting teams who can provide 2D technical drawings is ample compared to companies that provide 3D modelling services.

• Availability of software – The adoption of new software and practices is gradual and slow in the construction industry. The software used in building projects varies from country to country. Some countries use ArchiCAD and AutoCAD Architecture instead of Revit, therefore leading to the incompatibility of project data. 2D technical drawings in AutoCAD are widely used and compatible making it a preferred option to Revit 3D models.

• Suitable as per cost and budgetary requirements – In most cases, construction companies do not find the need to invest more in 3D models, when drafting solutions provide detailed technical drawings which are sufficient and relevant enough for construction. There is also the added investment in resources that are competent enough to understand and implement architectural 3d models on-site.

While architectural 3D modelling and BIM modelling provide design-related information typically required for architects and designers in the design stage of the building project lifecycle, architectural drafting provides technical drawings that are not just about aesthetics but about high-performance detailing of construction elements. Architectural CAD drawings specifically communicate the design intent and help in the construction of buildings which companies find relevantly sufficient over 3D models. Even as construction companies will need to eventually evolve to combining the use of 2D technical drawings and architectural 3D models until then, the time-tested practice of using architectural drafting and drawing solutions in construction is here to stay.

Posted in general | Comments Off on Why Architectural Drafting Is Common in Architectural Design

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

What Are the Advantages of Using a Web Based Project Management System

Every project needs a large number of people for the completion of any task. Projects are of several kinds, and there capacity level is also variant. In order to help the managers control all tasks, management system was introduced. Project management system is used to make the managers feel easy. The first type of a project management system is manual.

However, nowadays much web-based project management software is available in the market. There is no need to process data manually. Everything is computerized; managers just have to enter the basic information into the system. Nowadays, lots of project managers are opting for web-based project management systems. They have access to the web-based project management software’s, and tools.

Using a web-based management system has several benefits. Project managers can reach their computers from anywhere, not only computers, but they can also contact their team members and check the progress of work. Discussing any problems that arise with the team is a lot easier. Team members can also interact with each other via e-mail.

Project scheduling is the basic solution of web-based task management plan in a large organisation. In many ways a web-based activity management plan can help your managers achieve optimum results. Whether a project is based on finance, marketing, construction, or information technology (IT), and web-based project management plan can help t.

Web-based activity management plan helps managers to make a proper scheduling plan of the project. Web-based software has many tools which help in managing time, and activities. The software includes spreadsheets, network diagrams, or Gantt charts to control the task management scheme.

In project-management scheme, HTML, ASP, or PHP are the supported languages coded into the software, and browser. The team can access it through a web browser. Moreover, main software is installed on to the server for multiple clients.

Project management scheme helps managers to supervise all the team easily. If the manager finds any team member late in the completion of the task, he/she can track the problem, and change that member, thus, avoiding any delays.. Web-based project-management-system enables the mangers to distribute the workload according to the capability of human resource (HR). In addition, he/she can monitor the performance of each person involved in the completion of a job. This web-based project management system also enables the manager to measure the achievement, and performance of the team in accordance to the strategy chalked down for completion, or achievement of the target.

Web-based project-management system keeps the human resources satisfied from the point of view that whatever performance he/she is given is being registered, and is not over looked. If, a company is using a custom-made programme, which is flexible to different projects, it remains cost effective, and is not a burden on the bottom line. For different projects, which have different dynamics, companies may need a tailor-made programme for them, This can be a little costly, but it ensures better management, proper monitoring, and timely completion of tasks, ultimately ensuring good performances. Nowadays, this web-based project software is a very important tool for the management of any project. Furthermore, using the correct project management scheme, and software, can help managers to manage their project smoothly, and effectively.

Posted in general | Comments Off on What Are the Advantages of Using a Web Based Project Management System

Corel DRAW – Best Desktop Publishing Software

Corel DRAW is a supreme supplier of graphics software, including the popular Corel DRAW program. Corel DRAW has tools that allow the user to both create and edit images. The type of desktop publishing tools that you use will depend on the type of project. For more information and assistance, use the Corel website.

Corel DRAW is the best Desktop publishing software that empowers users to create illustrations containing graphics, text and photographs. Corel has an extensive range of tools which enable the user to edit any shape or character with ease and precision, fit text to curves and create custom color separations. It is developed and marketed by Corporation of Ottawa. This tool can open files: Adobe PageMaker, Microsoft Publisher and Word, and other programs can print documents to Adobe PDF using the Writer printer driver, which such software can then open and edit every aspect of the original layout and design.

Several innovations to vector-based illustration originated with Corel: a node-edit tool that operates differently on different objects, fit text-to-path, stroke-before-fill, quick fill/stroke color selection palettes, perspective projections, mesh fills and complex gradient fills.

One of this software’s many strengths is the huge range of over 1,000 fonts that it comes with, provided in both TrueType and Postscript Type 1 format. Corel differentiates itself from its opponent in a number of ways: The first is its positioning as a graphics suite, rather than just a vector graphics program. A full range of editing tools allow the user to adjust contrast, color balance, change the format from RGB to CMYK, add special effects such as vignettes and special borders to bitmaps. Bitmaps can also be edited more extensively using Corel PhotoPaint, opening the bitmap directly from Corel and returning to the program after saving. It also allows a laser to cut out any drawings.

Expert believed it was the first of the Windows-based drawing programs and has built on this early start to become far-and-away the dominant drawing package on the PC. Its biggest strength – and its biggest potential limitation – is its all-encompassing approach. In the past this has led to accusations of unfocused bloating, but with version 7.0 Corel has addressed the criticisms with a far tighter and better rationalized program. Even so, there’s a huge range of functionality to cover.

Corel DRAW Download was originally developed for Microsoft Windows and currently runs on Windows XP, Windows Vista, and Windows 7. The current version, X5, was released on 23 February 2010.

Posted in general | Comments Off on Corel DRAW – Best Desktop Publishing Software

How to Uninstall and Remove G DATA Antivirus Completely

G DATA Antivirus is a complete protection solution for your home computer. However, no matter the reason is that corrupt virus signatures may have caused it not to upgrade properly, it will not work regularly and needs to be repaired, or probably corrupt files are causing 100% CPU usage, etc. Like all other antivirus software, there also may be times when you have to uninstall and remove G DATA Antivirus.

The standard method of uninstalling G DATA Antivirus is from Windows built-in Add / Remove Programs, but sometimes the removal process will hang and you may be unable to remove this program from your computer, because some registry entries and spaces may still be left in Your system. In this case, if you wish to completely remove this antivirus, you have to delete all those sticky registry entries, processes, services, as well as related folders and files.

Removing all instances of this antivirus program can be extremely tricky and there is a risk of damaging the operating system if not done properly. Then you can try using a good removal tool to help you remove this program automatically in seconds. Perfect Uninstaller is one of such software. It works in a very simple manner. Aside from working to remove G DATA Antivirus, it can also get rid of other unwanted programs from your computer.

1. It offers a much quicker and easier way to completely remove programs which can not be removed through "Add / Remove Programs".
2. It completely deletes empty or corrupt registry entries.
3. It has the "force uninstall" function to forcibly uninstall corrupted or hidden programs.
4. It has the "Special Uninstall" function designed for some very specific programs in that list
5. It can restore the registry to a previous state, and restore files from the recycle bin (files deleted into the recycle bin).

Uninstall and remove G DATA Antivirus from your system before proceeding with the installation of the next antivirus that you would like to set up, otherwise the antivirus will conflict and give much trouble that you will not be able to recover Windows from the crash.

Posted in general | Comments Off on How to Uninstall and Remove G DATA Antivirus Completely

Medical Coding History – From Paper to Medial Coding Software

If we define medical coding as the assignment of alphanumerical characters to diagnoses, diseases, and treatments, then medical coding has been traced back to the 1600s in England with the London Bills of Mortality. A more standardized system of coding was developed for classifying death at the tail end of the 19th century. In 1893, Jacque Bertillon, a statistician, created the Bertillon Classification of Causes of Death, a system which was eventually adopted by 26 countries at the beginning of the 20th century. Shortly after the Bertillon Classification system was implemented, people began discussing the possibility of expanding the system beyond mortality as a way of tracking diseases.

By the middle of the 20th century, the World Health Organization (WHO) adopted a goal of a single global classification system for disease and mortality, entitled the International Classification of Diseases, Injuries, and Causes of Death (ICD). This classification system is updated every 10 years. The latest revision, ICD-10, is scheduled for adoption in the United States in 2013.

What started out as a small set of medical codes has evolved into a complex system that was initially standardized by the American Medical Association back in 1966 with current procedure codes (CPT) codes that are updated annually.

In the late 1970s, the Healthcare Common Procedure Coding System (HCPCS) was developed based on CPT. HCPCS has three levels of codes: Level One is the original CPT system. Level Two codes are alphanumeric and include non-physician services such as ambulances and other transportation as well as patient devices such as prosthetic devices. Level Three codes were developed as local codes, and were discontinued in 2003 in order to keep all codes relevant worldwide.

Recently, medical coding systems have been expanded to include other medical specialties. For example, there are coding systems related to disabilities, the dental field, prescription drugs, and mental health.

As the coding systems have become more complex and diverse, the need for training of medical coders has grown exponentially. Private training schools and public colleges throughout the country have developed certification programs. In order to be awarded a certificate, students must obtain a two-year degree from an accredited medical coding school and pass an exam given by the AHIMA.

Over the past 20 years, many coding processes have shifted from a paper-based system to a computer-based system using medical coding software and medical billing software. Many companies sell complete medical software-based coding solutions and myriad of products for specific medical disciplines, such as products that are specifically tailored to skilled nursing facilities, physicians, hospitals, surgery, cardiology, and more.

As medical facilities and professionals begin preparing for the conversion to ICD-10 in 2013, the need for more sophisticated medical coding software solutions and qualified medical coders will continue to grow.

CPT is a registered trademark of the American Medical Association.

Posted in general | Comments Off on Medical Coding History – From Paper to Medial Coding Software

Jingle Maker – Making Jingles With Desktop Music Maker Software

Looking to get into the jingle maker industry? It’s not exactly an easy field to break into but it is worth the trouble if you are ready to put forth the necessary time and effort to make it. If you are not already a professional musician then you will need a way to produce your jingles. We recommend desktop music maker software for this purpose. The rest of this article will cover the top three things you should look for when it comes to a desktop music making application for making jingles.

Feature #1 – Professional Music Production

If you are approaching the jingle making from the perspective of making money then you need to make sure your entire production is created in the manner that lends itself for commercial adaptation. This is essential if you expect your jingles to be used as radio jingles, commercial jingles or advertising jingles. For starters that means making sure you are able to create music output that is a minimum of 44,1 khz.wav files. You will also want to be able to create real bars of music versus samples or loops. This is a benefit of using music making software because it will make sure your music is created to be communicated to other musicians for playback.

Feature #2 – Variety Of Features

When you are just get started you will want something that allows you to take the melodies in your head and get them into music as quick as possible. Yet at the same time you don’t want to have to learn another application as your own skill set grows. This is why it makes sense to choose software that is usable as a beginner and expert alike. It should come with a number of presets that you can expand upon and purchase as your own abilities grow.

Feature #3 – Complete With Sound Generator

You never know where your jingle making skills will take you so you should also have access to making sound effects. It’s not necessarily a must have feature but if you have the choice then make it for software that does include this. You just never know when you may need this as a jingle maker.

We have briefly looked at some of the features you may want to look for when searching for music maker software for your jingle production exercise. The needed feature set should include professional music production capabilities, a variety of features and a sound generator. Of course these are just a small sample of features that you will find when looking for music maker software. But having the right tools just means you will be that much closer to creating the next set of catchy jingles.

Posted in general | Comments Off on Jingle Maker – Making Jingles With Desktop Music Maker Software

What is the Argus Safety Database?

The Argus safety database is a key part of the Argus Safety 3.0.1 pharmacovigilance software system. In a nutshell, pharmacovigilance is defined as the monitoring of any possible adverse effects of both herbal remedies and synthetic drugs as they are used.

The digital database is used to help companies ensure compliance with global regulations regarding pharmacovigilance and related activities. As a comprehensive pharmaceutical software system, it supports pharmacovigilance business processes that take place in both the pre- and post-marketing phases.

The Argus database is hosted in a data center that is ISO-9001-certified, and operates according to the security standards promulgated by FDA guidelines. By managing this data center, a pharmaceutical firm or laboratory may obtain maximum physical data security as well as access to effective data backup and recovery procedures whenever these services are needed.

ACCOVION, the full-service contract research organization that offers pharmacovigilance as a core service, has configured the Argus database with customized and validated rules to expedite safety reporting. This setup enables generated safety reports to be sent to regulatory investigators and central ethics committees.

The system covers a wide range of the most commonly used forms, including the American FDA MedWatch 3500A form for drugs, the VAERS form for vaccines, the CIOMS-I form, and many others utilized in European countries.

The standard setup in use by the Argus safety database system includes coding with current World Health Organization and MedDRA data dictionaries, as well as older versions of these dictionaries and many others to meet user requirements.

Posted in general | Comments Off on What is the Argus Safety Database?

How To Select The Best Credit Repair Software

Credit repair software tools are available to assist both credit repair agencies and/or individual consumers with credit repair. Ideally, such repair software is user-friendly and allows the user to point and click to a series of questions, and subsequent options, to engage in the process of credit repair by challenging credit reports from the major credit bureaus.

There are many software companies to choose from. Some claim to be the “best” while others claim to have the “absolute best credit repair software on the planet.” They all provide a unique service with even more unique and distinct features. The issue that you need to consider most when selecting credit repair software is which feature set will benefit you the most. So let’s take a look at steps that will help you select the proper software package for you.

1. Try to find a product with good technical support. A proper credit repair software program behaves like other expert software. This means 24/7 technical assistance, recurring software updates, sufficient help/manual documentation, etc.

2. Your credit repair software must adhere to your personal needs. A lot of these products have numerous add-ons, bonuses and other things which you would be paying for, but may not need. For example, some vendors cater to credit professionals, so they have functionalities on client management, etc, which you don’t need as a home user. On the other hand, you might need financial tips or the automatic reminder system.

3. Keep in mind, that you may have to write letters and that you are a unique customer with a unique address, account number, social security number, and story behind your dispute, which will have to be inside the letter. This single activity will take you many hours to complete. Try to find a software that already has pre-loaded dispute letters. Then once the software has automatically extracted those disputes from the above mentioned credit report providers, this software will in turn suggest the appropriate dispute letter automatically within just a few seconds. Just imagine the hours, and amount of money you can save by just this feature alone. Most people have to hire or outsource this kind of work because their software does not do it automatically. So not only will you save time but you will also save money by not having to outsource the work.

4. Rank available packages through analyzing pros/cons/cost. Once you have a short list of possible software packages, try to rank them by analyzing the pros and cons of each, as well as comparing the cost to your budget.

5. See if there is a trial period for the software that you select. Now that you have selected which package you feel would be the best fit for you, make sure that there is a money back guarantee so that you can return it if you are not satisfied with the performance.

The more you work on your credit repair, the more that it will demand of your time. This is why it is extremely important to choose the best credit repair software available to help you automate the process as much as possible. Choosing the right software package for your needs can save you lots of time. Working with automated software can be compared to driving a car to a distant destination, versus walking there. One way will be significantly faster than the other. Repairing your credit will be much more difficult if you are not using an organized system.

Posted in general | Comments Off on How To Select The Best Credit Repair Software